Volvo Door Access
3/13/2014
| RandyA (Randy) submitted these photos as a guide to accessing inside Volvo doors. Randy was adding power to his drivers door window..
Since there a few differences between Gen I and Gen II Volvos, the differences are indicated in addition to Randy's comments. |
||
 |
Gen I and Gen II Volvo door handles come off the same way |  |
 |
Gen I and Gen II Volvo have the same fasteners here. |  |
 |
Gen I Volvo lights come out in a similar fashion | |
 |
The Gen I Volvo uses a rubber plug to cover the screw instead of the cover. | |
 |
Gen I Volvo switch assembly comes out the same way. | |
 |
Gen I Volvos do not have the trim piece, You will find two plugs similar to pocket area with the screws behind, |  |
 |
Gen I Volvos use the same Christmas Tree fasteners | |
 |
Also disconnect the door speakers if you have them |  |
 |
Mark Bruss used standard Volvo window switches and the existing wiring harness in his VNL770. | |
 |
This is Randy's power window kit. |  |
| For more details on adding power window kits, refer to Mark Bruss' web site, Power Windows | ||